DTF transfer film Premium Matt (Instant Peel)

With FOREVER DTF transfer films, you can print designs with the finest details and vibrant colours. Part of the carrier layer remains on the ink layer during processing, which optimises the wash resistance.

The films are available in the dimensions DIN A4 (210 x 297 mm), DIN A3 (297 x 420 mm) and 400 x 500 mm.

Compatible with the following inks:

• DuPont™, P1600 series 
• Kodak, Kodacolor DTF/FTF
• Epson, DG-2
• STS DTF INKS

Recommended processing parameters:

1. Pre-press textile for 5-10 seconds
2. Position transfer
3. Transfer transfer:
• Natural fibre: ~140-155 °C / 15 seconds / 2.5 bar*
• Synthetic fibre: ~120-130 °C / 15 seconds / 2.5 bar*
4. Peel off transfer
5. Remove Instant Peel "hot" immediately after opening the press!
6. Re-press transfer for 5 seconds

• Ideal operating environment for printing & processing: 20-25 °C, 40-60% rel. humidity, non-condensing
• Depending on the textile, the transfer can be transferred within 1 second; minimum temperature for processing: 155°C*.

*Suitable parameters for further processing of a finished DTF film depend on various factors, such as the selected print settings & settings, the inks, hotmelt adhesives and films used or the textile material. and films or the textile substrate on which the transfer is to be placed!

The information on further processing is non-binding and does not constitute a guarantee of product and quality properties. Please carry out your own processing tests and check the results according to your requirements! your requirements!