DTF transfer film PE Brand Hot Peel / Double Coated Matt
The PE Brand Hot Peel transfer film is suitable for processing using the hot or cold peel method. The carrier material of the film has a thickness of 75 µ. The thickness of the inkjet coating enables printing with standard or well-known DTF inks from various manufacturers. Tip: The material should be pressed onto textiles at a maximum temperature of 155°C. Finished transfers should be processed within 6 months if stored properly. PRODUCT DESCRIPTION Films from the ‘PE Sense of Colour’ series...
more information Prices are only visible after registration. register here!
Product description
The PE Brand Hot Peel transfer film is suitable for processing using the hot or cold peel method. The carrier material of the film has a thickness of 75 µ. The thickness of the inkjet coating enables printing with standard or well-known DTF inks from various manufacturers. Tip: The material should be pressed onto textiles at a maximum temperature of 155°C. Finished transfers should be processed within 6 months if stored properly.
PRODUCT DESCRIPTION
Films from the ‘PE Sense of Colour’ series are compatible with inks from the following manufacturers:
- Kodak DTF/FTF Ink
- DuPont™ Artistri P1600 series
- Epson® UltraChrome DG / DG2 Inks
- Other manufacturers from the Far East
PROCESSING METHOD:
- Instant Peel: No (peel off film directly up to 1 second after application)
- Hot-Peel: No (peel off film 2-5 seconds after application)
- Warm peel: Yes (peel off film 5-10 seconds after application)
- Cold peel: Yes (peel off film when cold)
GUIDE VALUES PARAMETER FUSER UNIT:
- XP600-Pro & 450 mm fuser unit: Preheating: 55-60°C | Heating chamber: 98-110°C
- XP600-Pro & 600 mm fuser unit: Preheating: 55-60°C | Heating chamber: 98-110°C
- XP600-Pro (4-head) & 600 mm fuser Speed: Preheating: 60-65°C | Heating chamber: 102-115°C
Characteristics
| Foil basis: | PET carrier material |
| Processing of finished transfers: | If stored properly within 6 months. |
| Processing parameters: | Between 110 - 150 °C, depending on the textile or textile substrate. You can find detailed processing recommendations in our data sheet (see download) |
| Inkjet coating thickness: | 8 - 10 µ |
| Layer thickness of carrier material: : | 75 µ |
Downloads
Viewed