Subli Glaze clear varnish (matt) for sublimation transfer, 400 ml spray can, black label
400 ml spray can, for sublimation transfer
Prices are only visible after registration.
ART-NR:
DC-SCM-400
Product Information
Subli Glaze Matte Coating to prepare for sublimation printing. With this coating, you create a polymer layer on uncoated products to which sublimation inks can adhere.
Application:
- Shake the can for 1 minute.
- The surface to be coated must be clean, dry and free of grease
- Hold the can approx. 300 mm away from the surface and apply lightly in several passes at room temperature. This will give you a matt finish.
- Allow to air dry for approx. 10 minutes, then harden in the oven at 160°C for 15 to 20 minutes.
- Almost all surfaces may be preteated for sublimation transfer with the clear-base (matt) lacquer
- Surface has to be dry and degreased
- Spray onto the surface from a distance of 25 cm, effecting swinging movements
- Let it dry for 10 minutes
- Oven drying at 160 °C for 15 to 20 minutes
- Content sufficient for approximatively 2 square meters
Delivery only possible to EU mainland. DC-SCM-400
Application:
- Shake the can for 1 minute.
- The surface to be coated must be clean, dry and free of grease
- Hold the can approx. 300 mm away from the surface and apply lightly in several passes at room temperature. This will give you a matt finish.
- Allow to air dry for approx. 10 minutes, then harden in the oven at 160°C for 15 to 20 minutes.
- Almost all surfaces may be preteated for sublimation transfer with the clear-base (matt) lacquer
- Surface has to be dry and degreased
- Spray onto the surface from a distance of 25 cm, effecting swinging movements
- Let it dry for 10 minutes
- Oven drying at 160 °C for 15 to 20 minutes
- Content sufficient for approximatively 2 square meters
Delivery only possible to EU mainland. DC-SCM-400
Characteristics
| Version: | Acessories |
|---|
Hazard description
Customers also viewed
