DTF fuser unit PE450-PRO, for hot melt adhesive application & drying
Prices are only visible after registration.
ART-NR:
DTF-XP-PE-450
Product Information
Max. Passage width: 460 mm
Power supply:
Alternating voltage 230 V AC / 16 A
Power consumption: 3.590 Watt
Dimensions L x W x H:
1,680 x 770 x 965 mm (as delivered)
2,350 x 770 x 965 mm (assembled, incl. heating plate for material feed)
Weight: approx. 185 kg
Required operating range:
20-25°C / 40-60% rel. Humidity, non-condensing
Please note:
The fuser unit must be connected to the potential equalization (grounding) by a qualified electrician (for electrical installations) to the potential equalization (grounding).
This service is not part of the installation / training
provided by the Print Equipment company.
Ensure sufficient ventilation when fixing hotmelt and DTF ink.
The fuser unit must be connected to an existing extraction system / external filter system.
The capacity must be selected depending on your printing output
and should ideally be between 250 and 500 m³/h, for a room of approx. 50 m².
The procurement or the connection to an existing extraction system
or the integration of an external filter system are not included in the scope of services
and do not constitute part of the installation / training by Print Equipment.
Warranty:
The fuser unit is covered by a 12-month bring-in warranty.
Warranty and guarantee claims are void,
if the fuser unit is not operated within the required operating range.
*= The information on suction is based on tests and practical experience.
Our technical advice on applications is given to the best of our knowledge,
however, is only valid as non-binding advice and does not exempt you from carrying out your own tests.
The application, use of the fixing systems delivered by us
systems supplied by us is beyond our control and is therefore exclusively
in your area of responsibility. DTF-XP-PE-450
Power supply:
Alternating voltage 230 V AC / 16 A
Power consumption: 3.590 Watt
Dimensions L x W x H:
1,680 x 770 x 965 mm (as delivered)
2,350 x 770 x 965 mm (assembled, incl. heating plate for material feed)
Weight: approx. 185 kg
Required operating range:
20-25°C / 40-60% rel. Humidity, non-condensing
Please note:
The fuser unit must be connected to the potential equalization (grounding) by a qualified electrician (for electrical installations) to the potential equalization (grounding).
This service is not part of the installation / training
provided by the Print Equipment company.
Ensure sufficient ventilation when fixing hotmelt and DTF ink.
The fuser unit must be connected to an existing extraction system / external filter system.
The capacity must be selected depending on your printing output
and should ideally be between 250 and 500 m³/h, for a room of approx. 50 m².
The procurement or the connection to an existing extraction system
or the integration of an external filter system are not included in the scope of services
and do not constitute part of the installation / training by Print Equipment.
Warranty:
The fuser unit is covered by a 12-month bring-in warranty.
Warranty and guarantee claims are void,
if the fuser unit is not operated within the required operating range.
*= The information on suction is based on tests and practical experience.
Our technical advice on applications is given to the best of our knowledge,
however, is only valid as non-binding advice and does not exempt you from carrying out your own tests.
The application, use of the fixing systems delivered by us
systems supplied by us is beyond our control and is therefore exclusively
in your area of responsibility. DTF-XP-PE-450
Characteristics
| Dimension: | 2350 x 770 x 965 mm |
|---|---|
| Power: | 3590 W |
| Power supply: | 230 V AC |
| Print technology: | DTF ( Direct- to- Film) |
| Version: | Powder unit |
| Warranty: | 12- month bring- in service |
Customers also viewed
