DTF fuser unit PE600-PRO, for hot melt adhesive application & drying
Prices are only visible after registration.
ART-NR:
DTF-XP-PE-600
Product Information
Max. Passage width: 620 mm
Power supply:
Three-phase AC voltage 400 V / 20 A
(recommended fuse protection: 32 A, C-automatic)
Power consumption: 5,000 watts
Dimensions (LxWxH):
1,680 x 1,025 x 1,075 mm (as delivered)
2,350 x 1,025 x 1,075 mm (assembled, incl. heating plate for material feed)
Weight: approx. 260 kg
Required operating range:
20-25°C / 40-60% rel. humidity, non-condensing.
Please note:
The fuser unit must be connected to the equipotential bonding (earthing) by a qualified electrician.
to the potential equalisation (earthing).
This service is not part of the installation /
training by Print Equipment.
Ensure sufficient ventilation when fixing hotmelt and DTF ink.
The fuser unit must be connected to an existing extraction system / external filter system.
The capacity must be selected depending on your printing output
and should ideally be between 250 and 500 m³/h, for a room of approx. 50 m².
The procurement or the connection to an existing extraction system
or the integration of an external filter system are not included in the scope of services
and do not constitute part of the installation / training by Print Equipment.
Warranty:
The fuser unit is covered by a 12-month bring-in warranty.
Guarantee and warranty claims expire without exception,
if the fuser unit is not operated within the required operating range.
*= The information on suction is based on tests and practical experience.
Our technical advice on applications is given to the best of our knowledge,
however, is only valid as non-binding advice and does not exempt you from carrying out your own tests.
The application, use of the fixing systems delivered by us
systems supplied by us is beyond our control and is therefore exclusively
in your area of responsibility.
This information is based on tests and practical experience.
Our technical advice is given to the best of our knowledge,
but is only non-binding and does not release you from your own testing.
The application and use of the printing and fusing systems supplied by us are beyond our
systems supplied by us is beyond our control and is therefore exclusively
your area of responsibility. DTF-XP-PE-600
Power supply:
Three-phase AC voltage 400 V / 20 A
(recommended fuse protection: 32 A, C-automatic)
Power consumption: 5,000 watts
Dimensions (LxWxH):
1,680 x 1,025 x 1,075 mm (as delivered)
2,350 x 1,025 x 1,075 mm (assembled, incl. heating plate for material feed)
Weight: approx. 260 kg
Required operating range:
20-25°C / 40-60% rel. humidity, non-condensing.
Please note:
The fuser unit must be connected to the equipotential bonding (earthing) by a qualified electrician.
to the potential equalisation (earthing).
This service is not part of the installation /
training by Print Equipment.
Ensure sufficient ventilation when fixing hotmelt and DTF ink.
The fuser unit must be connected to an existing extraction system / external filter system.
The capacity must be selected depending on your printing output
and should ideally be between 250 and 500 m³/h, for a room of approx. 50 m².
The procurement or the connection to an existing extraction system
or the integration of an external filter system are not included in the scope of services
and do not constitute part of the installation / training by Print Equipment.
Warranty:
The fuser unit is covered by a 12-month bring-in warranty.
Guarantee and warranty claims expire without exception,
if the fuser unit is not operated within the required operating range.
*= The information on suction is based on tests and practical experience.
Our technical advice on applications is given to the best of our knowledge,
however, is only valid as non-binding advice and does not exempt you from carrying out your own tests.
The application, use of the fixing systems delivered by us
systems supplied by us is beyond our control and is therefore exclusively
in your area of responsibility.
This information is based on tests and practical experience.
Our technical advice is given to the best of our knowledge,
but is only non-binding and does not release you from your own testing.
The application and use of the printing and fusing systems supplied by us are beyond our
systems supplied by us is beyond our control and is therefore exclusively
your area of responsibility. DTF-XP-PE-600
Characteristics
| Dimension: | 2350 x 770 x 965 mm |
|---|---|
| Electricity: | 5.000 Watt, 400 V AC, 20 A |
| Print technology: | DTF ( Direct- to- Film) |
| Version: | Powder unit |
| Warranty: | 12- month bring- in service |
